SMC Networks HRSE018-A Operation Manual page 58

HRX-OM-R039
Chapter 5 Display and setting of various functions
to
 Settings of this function and example of alarm generating timing for 5.6.3 "Setting of
temperature alarm monitoring method and generation timing".
Range over detection timer; Setting and Checking
29.
Press the [SEL] key once.
Setting screen of the range over detection timer is displayed on the digital display.
PV
SV
30.
Select range over detection timer from the table below with [▲] key or [▼] key, and
confirm by pressing "SEL".
Set value
to
 Settings of this function and example of alarm generating timing for 5.6.3 "Setting of
temperature alarm monitoring method and generation timing".
31.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
5.6 Alarm customize function
5-20
Sets the time when alarm monitoring starts
Setting unit is 1 minute.
Table 5.6-9
Explanation
Sets time from detecting the alarm to
generation of the alarm.
Setting unit is 1 second.
List of set value
(Default setting)
Initial value
HRSE Series