SMC Networks HRSE018-A Operation Manual page 54

HRX-OM-R039
Chapter 5 Display and setting of various functions
10.
Select detection temperature for circulating fluid discharge temperature drop from the
table below with [▲] key or [▼] key, and confirm by pressing "SEL".
Set value
Centigrade
to
11.
Press the [SEL] key once.
"AS07" is displayed, but this feature is not available on this product.
PV
SV
12.
Press the [SEL] key once.
"AS08" is displayed, but this feature is not available on this product.
PV
SV
13.
Press the [SEL] key once.
"AS09" is displayed, but this feature is not available on this product.
PV
SV
14.
Press the [SEL] key once.
"AS10" is displayed, but this feature is not available on this product.
PV
SV
5.6 Alarm customize function
5-16
Table 5.6-6 List of set value
Explanation
Setting/checking are not available if the setting of
the circulating fluid discharge temperature drop is
OFF.
Sets detection temp for the circulating fluid
discharge temperature drop.
Temperature unit is Centigrade : Setting unit is 1
Initial value
(Default setting)
o
C
HRSE Series