4 / CARING FOR AND CLEANING YOUR APPLIANCE
•
CLEANING THE OUTER SURFACES
To clean the outside of your hood, use soapy water, but do not use abrasive creams or
scrubbing sponges.
•
CHANGING THE LIGHT BULB
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
Model with halogen bulb
— Remove the lighting port (fig. 1).
— Change the halogen bulb:
— Replace the bulb by repeating these steps
in reverse order.
G4-20W-12V.
61
EN
fig. 1