e
stand
5
Follow the procedure in
Memory module
Removing memory module
1
Follow the procedure in
2
Remove the:
a
stand
b
optical drive
c
back cover
d
system board shield
3
To remove memory module:
a
Pry the retention clips away from the memory module until it pops-up [1].
b Lift the memory module from the connector [2].
4
Perform the same steps to remove the second memory module.
Installing memory module
1
Insert the memory module into the slot and press until the clips snap-in.
2
Perform the same steps to insert the second memory module.
3
Install the:
a
system board shield
b
back cover
c
optical drive
d
stand
16
Removing and installing components
After working inside your
computer.
Before working inside your
computer.