a
system board shield
b
back cover
c
optical drive
d
stand
5
Follow the procedure in
Power and On-Screen Display
Removing power and On-Screen Display (OSD) board
1
Follow the procedure in
2
Remove the:
a
stand
b
optical drive
c
back cover
3
To remove OSD board:
a
Peel off the adhesive tapes from the OSD board [1].
b Turn over OSD board to access the cable [2].
c
Disconnect the cable from the power and OSD board to release the board from the computer [3].
Installing power and On-Screen Display (OSD) board
1
Connect the OSD cable to the power and OSD board.
2
Insert the power and OSD board into the slot.
3
Affix the adhesive tapes on the OSD board.
4
Install the:
a
back cover
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
23