Installing Graphics Card Assembly; Processor; Removing Processor - Dell OptiPlex 3050 Owner's Manual

b Remove the M2x2.5 screws that secure graphics card assembly on the computer [3].
c Lift the graphics card assembly away from the computer [4].

Installing graphics card assembly

1 Align and place the graphics card assembly in the slot on the chassis.
2 Replace the M2x2.5 screws to secure the graphics card assembly on the computer.
3 Connect the graphics card and SATA ODD cables to the connector on the system board.
4 Install the:
a system board shield
b back cover
c optical drive
d stand
5 Follow the procedure in

Processor

Removing processor

1 Follow the procedure in
2 Remove the:
a stand
b optical drive
c back cover
d system board shield
e heat sink
3 To remove processor:
26 Removing and installing components
After working inside your computer.
Before working inside your computer.