Installing speaker
1
Align and place the system fan into the slot on the chassis.
2
Route the speaker cables through the retention clips.
3
Connect the speaker cable to the connector on the system board.
4
Align the speaker cover to its position on the back of the computer.
5
Replace the M2x2.5 screws to secure the speaker cover to the computer.
6
Install the:
a
system board shield
b
back cover
c
optical drive
d
stand
7
Follow the procedure in
Graphic card assembly
Removing graphics card assembly
1
Follow the procedure in
2
Remove the:
a
stand
b
optical drive
c
back cover
d
system board shield
3
To remove graphics card assembly:
a
Disconnect graphics card and SATA cables from the system board [1,2]
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
25