Operation - Polar Electro G590/G591/G592/G593/G594/G595/U632/U633/U634/U635/CC663/CD616/GD879/GD880/ Instruction Manual

Cabinet refrigerators/freezers
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Telephone Helpline: 0845 146 2887 (United Kingdom)
Installation
Note: If the appliance has not been stored or moved in an upright position, let it stand upright for approximately 12 hours before
operation. If in doubt allow the appliance to stand.
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are thoroughly removed from all surfaces.
1.
Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation. Increase this distance if the obstacle is a heat source.
2.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy water.
Set the brakes on the castors to keep the appliance in position
3.
OR
Level the appliance by adjusting the screw feet.
Removing the Compressor Safety Band
(G592/G593/G594/G595/CC663/CD616/CW193/CW194/CW195/CW196/CW197/CW198 only)
The compressor is located on the top of the appliance, and sits on rubber washers. Under normal operating conditions the compressor is allowed to vibrate.
To avoid damage through excessive motion during transit, a stainless steel safety band is placed over the compressor and screwed into the top of the
appliance.
This safety band and the two screws fixing it to the appliance must be removed before the appliance is turned on.
Lock/Unlock the Doors
A lock is fitted to the doors to ensure foodstuffs are kept secure within your POLAR appliance.
Use the keys provided to lock/unlock the doors.
Fitting the Waste Water Tray (G592/G593/G594/G595/CC663/CD616/CW193/CW194/CW195/CW196/CW197/CW198 only)
The waste water tray comes ready to fit to the underside of the appliance.
Slide the tray into the runners situated under the appliance.
Fitting the Shelves & Floor Guards
Place one set of shelf guides on either side of the cabinet at the desired height.
1.
Slide the shelf into place.
2.
Repeat for the remaining shelves.
3.
Place the floor guards on the floor of the cabinet, ensuring the flat side is clear of the floor.
4.
Note: This is vital for ensuring correct drainage of condensation.

Operation

Storing Food
To get the best results from your POLAR appliance, follow these instructions:
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
Do not place uncovered hot food or liquid inside the appliance.
Wrap or cover food where possible.
Do not obstruct the fans inside the appliance.
Avoid opening the doors for prolonged periods of time.
Compressor
Safety Band
Compressor
Screws
UK
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cw193Cw195Cw194Cw196Cw197Cw198

Table of Contents