TRENDnet TEW-WLC100 User Manual page 18

TRENDnet User's Guide

Device Settings – First, under the Select column, check the access points you
would like to configure and then click on Device Settings. A configuration
window will appear with all of the available configurable access point settings.
© Copyright 2016 TRENDnet. All Rights Reserved.
Important Note: For any changes to be applied under device settings, you must enter the
access point management password before clicking OK and applying the changes. By
default, the compatibility TRENDnet access point user name and password is set to
admin / admin.
.
For usability with the wireless controller, it is recommended to change all of the access
point management passwords to the same unique password. This allows the controller
push out configuration to multiple access points simultaneously.
To change the access point management password, you must manually log into the
access point management user interface and change each access point password. To
easily access each access point management interface, you can simply click on the IP
address link in the IP address field next to each access point which will automatically
open up the access point management interface in a new browser tab or window.
TEW-WLC100
16