TRENDnet User's Guide
View your controller system log
Advanced > Administrator > System Log
Your controller system log can be used to obtain activity information on the
functionality of your controller or for troubleshooting purposes.
1. Log into your controller management page (see
management
page" on page 8).
2. Click on Advanced and click on Administrator, then click on System Log.
3. Next to Function, select Enabled or Disabled to enable or disable logging. Then click
Apply. The logging will display in the log window.
Log Window
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access you wireless controller
Basic Connectivity Test
Advanced > Administrator > Ping Test
The controller a built in ping test tool to check for basic connectivity.
1. Log into your controller management page (see
management
page" on page 8).
2. Click on Advanced and click on Administrator, then click on Ping Test.
3. Enter the host name or IP address to check connectivity and click Ping.
Note: Host name connectivity tests require the IP default gateway and primary DNS
server settings to configured properly.
TEW-WLC100
"Access you wireless controller
11