Pyramid WM-1000 Product Manual page 42

Menus - Incoming Text Messaging
When the WM-1000 receives an incoming text message from a Kenwood NEXEDGE base station or PC
software, the unit will alert with an audible beep then display the incoming message on the Channel
Alias line of the main menu.
Note: Short Messages are limited to 100 characters by the NEXEDGE PC protocol.
If a message is longer than what can be displayed on the
WM-1000 screen, a ">" icon will appear at the end of the line
of text. Rotate the Mode/Scroll knob to scroll the text and view
the rest of the message.
Press down on the Volume knob to exit the viewing of this
message. The incoming text messages are not stored after
the user exits the message view display.
- Status Message -
Address: 30
WM-1000