Pyramid WM-1000 Product Manual page 41

Menus - Status Messaging
When the Status Message mode is selected, the WM-1000 will display a Status list of possible canned
status messages the user can select. Rotate the Mode knob to scroll through a list of status messages
available.
Note: Status Message list is configured in the WB-1000
through the CPS software.
Press down on the Mode Knob to accept your selection. Notice the
"> <" icons showing you your current selection.
Your message will be confirmed with an audible beep.
This indicates that the WB-1000 has received the message and
sent it along to the Kenwood mobile radio.
- Status Message -
> In Service <
Note: The destination ID for all status messages is set in the CPS
WM-1000
software. Use the Kenwood Base / Console Radio ID field to set
the destination where ALL status messages will be sent.