Menus - Remote Control
When the Remote Channel mode is selected, the WM-1000 will display a remote channel list of pos-
sible channels the user can select. Rotate the Mode knob to scroll through a list of remote Zones and
Channels that will allow this user to steer the Zone and Channel of their mobile radio in the vehicle.
Note: Remote Channel list is configured in the WB-1000
through the CPS software.
Press down on the Mode Knob to accept your selection.
Your message will be confirmed with an audible beep.
This indicates that the WB-1000 has received the message and
sent it along to the Kenwood mobile radio.
Zone: 1 Ch: 1
[Enter To Set]
WM-1000