Pyramid WM-1000 Product Manual page 26

Status Message Config:
Using the Load/Save and Get/Program, you can load or save profiles of the status message and zone/channel
config tables to a file on your PC. This file is kept separate from the main personality of the WB-1000. To read
the status and zone/channel configuration out of a WB-1000, select Get from the menu. This will populate both
the Status Message List and the Zone/Channel list.
Use the Status Message List to complete the status used in the Kenwood NEXEDGE and FleetSync radio interface.
These will be the actual status numbers sent by the mobile radio to the base station and/or base software.
Ensure that this list of status messages and corresponding number match up with the list of expected statuses on
your NEXEDGE system.
This status list is on a 'per paired' channel in the WM-1000. A WM-1000 can be paired with multiple WB-1000
units, each having its own unique NEXEDGE Status Message List.
Note: Use the GET and PROGRAM menu items in this tab to read and write Kenwood specific data to the WB-
1000. The data on this screen IS NOT sent along with the READ / WRITE personality on the main screen.