Pyramid WM-1000 Product Manual page 28

Zone/Channel Config:
Using the Load/Save and Get/Program, you can load or save profiles of the status message and zone/channel
config tables to a file on your PC. This file is kept separate from the main personality of the WB-1000. To read
the status and zone/channel configuration out of a WB-1000, select Get from the menu. This will populate both
the Status Message List and the Zone/Channel list.
Use the Zone / Channel list to create a table to channels the WM-1000 user can change to on their Kenwood
NEXEDGE or FleetSync radio. These channels will be available from the front panel of the WM-1000.
Ensure that the Zone and Channel you put in this list is programmed into your Mobile Radio. The WM-1000 and
WB-1000 will not be able to steer a mobile radio to a channel that is not in the mobile radio personality.
This channel list is on a 'per paired' channel in the WM-1000. A WM-1000 can be paired with multiple WB-1000
units, each having its own unique Remote Zone/Channel List.
Note: Use the GET and PROGRAM menu items in this tab to read and write Kenwood specific data to the WB-
1000. The data on this screen IS NOT sent along with the READ / WRITE personality on the main screen.