Wm-1000 Programming / Pairing - Pyramid WM-1000 Product Manual

4.6 Handheld Programming / Pairing:
The WM-1000 isn't programmed with any PC software, but rather obtains its personality from the WB-
1000. When the WB-1000 is programmed with the mobile radio parameters, select the desired chan-
nel on the WM-1000 you wish to program and insert the WM-1000 into the WB-1000 dock/charger.
Ensure both units are powered on, and press the button on the WB-1000 to program/pair the WM-
1000 to the selected base programming.
Note: If you recently made changes to your WB-1000, make sure you have written the new program to
your WB-1000 using the CPS Software and then re-pair your WM-1000 to update the WM-1000 with
the new settings.
If you have multiple base units with different channel parameters, simply select a different channel on
the WM-1000 and repeat the steps above to program the selected channel on the WM-1000 to the
WB-1000.
Steps to Pair:
1. Place WM-1000 in cradle and turned on
2. Make sure WM-1000 is powered on
3. Briefly press pairing button
4. A confirmation Beep and display
will indicate successful pairing.
WB-1000
PAIRING BUTTON