Display (continued)
When the WM-1000 receives an emergency from another WM-1000, the Emergency Status and Alias
of the originating WM-1000 will be shown on the Channel Alias line of the display.
Note: If the alias of the incoming emergency is longer than
the display can show, a ">" will be shown at the end of the
line of text. Use the channel select/scroll knob on the top
of the WM-1000 to see the entire name of the sending unit.
Push the Volume knob to escape out of the emergency
alarm and return to the main menu screen.
Incomming Emergency ID
Volume: 25%
Emergency: Bob
Address: 40
WM-1000