Table of Contents
Advertisement
O
PERATION
White Balance
This setting allows for selection of the white balance shown by the Ovation C-805FC when the color setting
is RGBAL and the DMX controller's red, green, blue, amber, and lime faders are set to 255.
1.
Go to the White Balance main level.
2.
Select Manual to continue to adjust the white balance or Off to default to the original factory
setting.
3.
Select a color (Red, Green, Blue, Amber or Lime).
4.
Select a color value (125–255).
5.
Repeat for the other colors.
The values of Red, Green, Blue, Amber and Lime configured will define the color
temperature shown when the RGBAL faders are set to 255.
Virtual Color Wheel
The Virtual Color Wheel mode allows for preset popular colors RGBAL color mixing without a DMX
controller.
1.
Go to the VCW (Virtual Color Wheel) main level.
2.
Select VCW (Virtual Color Wheel).
3.
Select the desired color (R4590, R11, R312, R03, R18, R20, R21, R26, R27, R33, R337, R38,
R41, R42, R44, R349, R54, R64, R364, R65, R80, R81, R82, R382, R83, R383, R90, R91, R92,
R93, or R393).
4.
Press <ENTER> twice.
5.
Use <UP> or <DOWN> to select the Dimmer value, from 000–255.
6.
Press <ENTER>.
Manual Color Mixer
The Manual Color Mixer mode allows for permanent RGBAL color mixing without a DMX controller.
1.
Go to the VCW main level.
2.
Select MCM (Manual Color Mixer).
3.
Select the desired color (Red, Green, Blue, Amber, or Lime).
4.
Select the color value (000–255).
5.
Repeat for the other colors.
Color Temperature
The color temperature mode allows for permanent white color temperature presets without a DMX
controller.
1.
Go to the VCW main level.
2.
Select CCT (Color Temperature).
3.
Select the desired color (2800K, 3200K, 3500K, 4000K, 4500K, 5000K, 5600K, 6000K, or
6500K).
Dimmer Profiles
This setting determines how fast the output of the Ovation C-805FC changes when you modify the values
of the red, green, blue, amber, and dimmer faders. This setting provides four different options to simulate
the dimming curve of an incandescent lighting product.
•
Go to the Dimmer Mode main level.
•
Select a dimmer curve (OFF, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF: The output is proportional (linear) to the dimmer and RGBAL channel values.
Dimmer 1-3: The output follows the dimmer and RGBAL channel values based on the
corresponding dimmer curve, DIM1 being the fastest.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation C-805FC.
1.
Go to the LED Frequency main level.
2.
Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 2400Hz, 6000Hz, 18Khz, or 25Khz).
Ovation C-805FC User Manual Rev. 3
Page 22 of 28
Advertisement
Table of Contents
