Table of Contents
Advertisement
The remainder of the parts involved in either Feature Code 7990 or 7991 include:
v Side-to-side support bars at EIA unit 38, front and rear
v New side-to-side support bars, to stiffen the frame
v A triangular support bar, hung on two hinges and secured with a vertical stop
v A latch for the triangular support bar
v A pair of stabilizer bars that rest on the raised floor between the corners of each
v Four turnbuckle assemblies with fastening hardware that extend through the
v Heavier cover door latches.
These additional tie-down parts are installed along with the server. The installation
instructions are included as an appendix in the z10 BC Installation Manual, shipped
with the server.
110
z10 BC IMPP
frame
raised floor and are secured to the eyebolts
Level 03c, May 2011
Advertisement
Table of Contents
