Table of Contents
Advertisement
To end the call, press the
Loudspeaker button again
(same as putting down the
receiver).
Transferring calls / Flash (R button)
On most telephone systems, the R button can be used to transfer
calls. Refer to the operating instructions for your telephone system
or ask your system administrator.
Accept call, e.g. with the tel-
ephone receiver.
Press the R button.
Use the numeric keypad to
enter the required call recipi-
ent.
...
If the line is busy, you can
reconnect to the caller by
pressing the R button.
Tell the caller the call is being
transferred or simply put
down the receiver.
This process can vary depending on telephone system. For
many functions initiated with a flash (R button), setting the
flash from short to long may also be required (also refer to
"Advanced settings").
Telephone functions / making calls
14
The line is disconnected.
You can speak to the person at
the other end and say the call is
being transferred.
The connection is established.
The R button must be pressed
twice on many telephone sys-
tems.
The call is transferred.
Advertisement
Table of Contents
