Advertisement
g! C
D
ONFIGURATION
ETAILS
The following table provides settings used in the g! Configurator. Please refer to the g! Configurator Reference Guide for more details.
In the table below:
"<Select>"
o
"<User Defined>", etc.
o
Devices
Communication Devices
<Other RS-232 Sources>
<Other IR Controlled Sources>Add IR devices on the Input/Output tab for other IR controlled sources. Refer to the Configurator Reference Guide .
Other Audio Devices / InterfaceName
Audio Zone Controllers
Sources
Zones
Name
Display
Tab Layout
Notes:
1. If multiple Elan Zone Controllers are used, only one communications device is required.
2. Select the appropriate number of zones from the list based on the number of V883/V85 chassis in the configuration.
Select the appropriate item from the list (or drop-down) in the Configurator.
Type in the desired name for the item.
Variable Name
<User Defined> (Default: Elan System)(See note #1)
Name
Type
Serial Port
Communication Type Elan System
<User Defined> (Not Required)
Location
<Select>
Com Port
Add any other RS-232 controlled sources. Refer to the Integration Note for each specific source device.
<User Defined>
<Select>
Template
<Select>
Default Device
Name
<User Defined> (Default: Elan V883 or Elan V85)
Elan V883 (# Zones) or Elan V85 (# Zones)(See Note #2)
Device Type
<User Defined> (Not Required)
Location
<Select> (Default: Elan System)
Comm Device
<User Defined>
Name
<Select>
Source Device
<Select>
Source Volume
<Select>
Show Source
<Select>
Source Icon
<User Defined>
Display Name
<User Defined>
<Select>
Universal Receiver
<Select>
Configuration Interface <Select>
<Sources List>
<N/A>
Interface Tabs
<Select>
Setting
Add Interfaces for any source that does not have a built-in interface
Select the RS-232 or IR controlled source for this interface
Sources must be previously configured in order to allow selection.
Set to No for any inputs that are not used
This icon appears on the source button in the Viewer Interface
This text appears on the source button in the Viewer Interface
Move any unused zones to the right into Available Zones to remove from the viewer
4 of 5
Comments
Advertisement
