4-4 Calibration
1. Lens Calibration
Note: Always perform a Lens Calibration after repairing the projector.
Inspection Item - Check if the Lens Shift Module is moving
Criteria
- If the Lens Shift Module is not moving
Procedure
- Place the projector on a clean horizontal
- On the Remote, press Menu >SETUP>Lens Function.
- Select Lens Calibration.
- Press Enter.
2. ABC Calibration
Note: Always perform ABC Calibration after repairing
the engine or main board.
- Please get into service mode
smoothly.
smoothly
or sound noising,please replace the
light engine module.
surface.
EK-810U/EK-811W
4-3