ZyXEL Communications MGS3750-28F User Manual page 36

Chapter 6 Advanced Application Configurations
Table 18 EAPS Screen
LABEL DESCRIPTION
Ring List This field display the ring ID. "0" means master ring; "1"means sub ring.
Delete Click Delete to remove the selected entry from the summary table.
Once a row is added to the table but the ring is not, click on "none" to add the ring.
Figure 26 Domain ID List Screen
The following table describes the fields in this screen.
Table 19 EAPS Screen
LABEL DESCRIPTION
Domain ID This field displays the domain configuration mode.
Control VLAN This field displays the Control VLAN configured.
Work Mode This field displays the work mode you selected.
Topo Collect This field displays whether Topo Collect is enabled or not.
Ring List This field display the ring ID. "0" means master ring; "1"means rub ring.
Delete Click Delete to remove the selected entry from the summary table.
Adding a ring.
Figure 27 Ring Screen
The following table describes the fields in this screen.
Table 20 EAPS Screen
LABEL DESCRIPTION
Active Select this option to enable the ring.
Ring ID Select the ring ID. "0" means master ring; "1" means sub ring.
Query Solicit Click the check box to enable solicit query. When EAPS topology change, the device
will send a solicit query or ICMP query to all the ports to reinitiate IGMP report to
update the multicast entry.
Bridge Role Select master or tansit.
Primary Port Enter a primary port number for master or transit selected in Bridge Role field.
Secondary Port Enter a secondary port number for master or transit selected in Bridge Role field.
Level Select the ring level number.
MGS3750-28F User's Guide
36