ZyXEL Communications MGS3750-28F User Manual page 17

Table 3 Port Status Screen (continued)
LABEL DESCRIPTION
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port.
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
When LACP (Link Aggregation Control Protocol), STP, and dot1x are in blocking state, it
displays Blocking.
LACP This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on
the port.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number of kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time in hours, minutes and seconds the port has been
up.
Clear Counter Select Port, enter a port number and then click Clear Counter to erase the recorded
statistical information for that port, or select Any to clear statistics for all ports.
Chapter 4 Overall Web Page Layout
MGS3750-28F User's Guide
17