Vlan Port Settings - ZyXEL Communications MGS3750-28F User Manual

Table 8 VLAN Status Screen (continued)
LABEL
Status
Port Number

6.1.2 VLAN Port Settings

Use the VLAN Port Setup screen to configure the static VLAN settings on a port.
Figure 16 VLAN Port Settings Screen
The following table describes the fields in this screen.
Table 9 VLAN Port Settings Screen
LABEL
VLAN Status
Global GVRP
Port
PVID
Chapter 6 Advanced Application Configurations
DESCRIPTION
This field shows how this VLAN was added to the Switch.
Dynamic: using GVRP
Static: added as a permanent entry
Voice: manually added as a Voice VLAN
MVR: added via multicast VLAN registration
Private - manually added as a private VLAN (primary, isolated or community)
This column displays the ports that are participating in a VLAN. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked as "–".
DESCRIPTION
Return to the VLAN status page.
Enable global GVRP function.
This field displays the port number.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1and 4094 as the port VLAN ID.
MGS3750-28F User's Guide
23