Contec 40 Series User Manual page 28

5. Appendix
Battery
Battery Specification
This product uses the following battery.
- Type
- Model
- Maker
- Nominal voltage
- Nominal capacity : 240mAh
- Lithium content
Removing the battery when disposing of the product
Before disposing of the product, follow the instructions given below to remove the battery.
(1) Remove the front cover.
(2) Remove the screws (in four locations) from the back of the product, and then remove
the back cover.
Remove the center battery connector, cut the cable tie, and then remove the battery.
Figure 5.1. Removing the battery
Disposing the battery
Dispose the removed battery properly as instructed by local government.
PT-40 User's manual
: Lithium primary battery
: CR2032
: HITACHI MAXELL
: 3V
: 1g or less
Remove the connector.
5. Appendix
Cut the cable tie.
23