3. Hardware Setup
Before Using the Product for the First Time
Follow the next steps to set up this product:
STEP1
By referring to the information in this chapter, install, connect and set this product.
STEP2
Connect cables.
Connect the cable of necessary external devices, such as keyboard and a mouse, to this
product using appropriate cables.
STEP3
Turn on the power.
Check once more that STEP1 and STEP2 have been carried out correctly, and
then connect the power cable to DC-IN. After power is supplied, the product
will start automatically. If you detect an error when the product is on,
immediately unplug the power cable from DC-IN, and then check whether
setup has been performed correctly. This product does not have a power switch.
CAUTION
Be sure to connect the keyboard and mouse to it before turning the power on for the first time.
PT-40 User's manual
3. Hardware Setup
11