3. Hardware Setup
Hardware Setup
-
Before you start, be sure that the power is turned off.
-
Remove only those screws that are explained. Do not move any other screw.
Attaching of FG
(1) Use screws to attach the FG. (The screws are attached to the product when it is shipped.)
Do not apply excessive force when tightening the screws.
* Use the mounting screws included with the product. (M3)
Figure 3.1. Attaching the FG
Fastening the Cable
Fastening the USB Cable
The system unit has a hole for attaching cable clamp. Using a cable clamp for a cable with lock-less
connector, such as the USB Cable, prevents the connector from being unplugged. Use the cable ties and
cable clamps appropriately according to the connecting states and wiring directions of cables.
Figure 3.2. Attaching the cable clamp
12
PT-40 User's manual