Reflectors - Dynacraft MOUNTAIN BIKE Owner's Manual

11. REFLECTORS

Reflectors are pre-installed on your bicycle
on the pedals, wheels, seatpost, and
handlebars (see Figure 46). Ensure that
the handlebar reflector is pointing straight
forward and perpendicular to ground, and
position the rear reflector so that it points
straight backwards. Use (A) Phillips head
screwdriver to loosen and adjust before re-
tightening (see Figures 47 & 48).
NOTE:
Now that the initial assembly is
complete, the bike needs to be adjusted before it
is ready to ride. Follow the steps in the following
Bicycle Adjustments section to adjust the bike.
Front reflector
Figure 46
Figure 47
Rear reflector
Wheel reflector
Pedal reflector
Figure 48
C
31