Table of Contents
Advertisement
Causes of malfunction
Fault rectification
24 hour service hotline
Conductive probe EL 4
7 Maintenance and fault rectification
7.1 Maintenance
When used in the correct way, no special maintenance is required in
normal operation.
7.2 Remove interferences
A maximum of reliability is ensured. Nevertheless, faults can occur
during operation. These may be caused by the following, e.g.:
Sensor
l
Process
l
Power supply
l
Signal processing
l
You can find information on fault rectification in the operating
instructions manual of the corresponding signal conditioning instru-
ment.
However, should these measures not be successful, call the VEGA
service hotline in urgent cases under the phone no. +49 1805 858550.
The hotline is available to you 7 days a week round-the-clock. Since
we offer this service world-wide, the support is only available in the
English language. The service is free of charge, only the standard
telephone costs will be charged.
7.3 Shortening the probe
The probe can be shortened by any amount.
Note:
Take note when shortening multiple probes that terminal 1 corre-
sponds to the longest probe and terminal 2 to the shortest probe.
7.4 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
By doing this you help us carry out the repair quickly and without
having to call back for needed information.
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and, if need be, also a safety data
l
sheet outside on the packaging
7 Maintenance and fault rectification
15
Advertisement
Table of Contents
