Table of Contents
Advertisement
4 Mounting
Inflowing medium
10
Extreme vibration caused by the system, e.g. due to agitators or
turbulence in the vessel from fluidization, can cause the probe of EL 4
to vibrate in resonance. If a longer rod version is necessary, you can
secure the probe by fastening a suitable insulating brace or guy
directly above the end of the rod.
1
2
Fig. 3: Fasten the probe
Probe
1
Plastic socket
2
If EL 4 is mounted in the filling stream, unwanted false measurement
signals can be generated. For this reason, mount EL 4 at a position in
the vessel where no disturbances, e.g. from filling openings, agitators,
etc., can occur.
This applies particularly to instrument versions with a longer probe.
1
2
Conductive probe EL 4
Advertisement
Table of Contents
