Ducati SUPERBIKE 1199 PANIGALE ABS Owner's Manual page 52

The functions within the Setting MENU that can be
modified by the user are the following:
- RIDING MODE customization: within this menu,
rider can customize the following:
- ABS setting (ABS)
- Electronic suspension setting (DES)
- Display settings (DISPLAY)
- DQS ON/OFF (DQS)
- DTC level (DTC)
- Engine setting (ENGINE)
- EBC level (EBC)
- Reset to default factory settings (DEFAULT)
- Engine rpm digital indication (RPM)
- Battery voltage (BATTERY)
- DDA (on/off - view - delete)
- PIN CODE (enter/change)
- Clock settings (CLOCK SETTING)
- Date settings (DATE)
- Display backlighting (BACK LIGHT)
- Units of measurement (Speed - Temperature -
Fuel consumption) UNIT
- LAP (view/delete/reset automatic settings)
The area for the 10500-11500 rpm range (pre-warning
area) is indicated on the display in orange, used both
for filling the bar graph and indicating the
corresponding figure 11 ("orange area").
The area for the 11500-12000 rpm range (warning
area) is indicated on the display in red, used both for
filling the bar graph and indicating the corresponding
figure 12 ("red area").
Important
During the first 1000 km (Break-in period), i.e.
as long as the Odometer displays a value lower than
or equal to 1000 km, the "orange area" (pre-warning
area - on the display with orange used for bar graph
filling and to indicate the corresponding figure) is
displayed when engine reaches 6000 rpm. During
this break-in period, it is not advisable to exceed 6000
rpm, so make sure the instrument panel does not
display the "orange area" of the bar graph.
After the break-in period, the "orange area" indicates
and advises the rider to ride at lower revs when the
engine is cold; the "orange area" position changes
according to engine temperature as follows:
- from 8000 rpm with engine temperature lower
than or equal to 104 °F (40 °C)
51