Attention
If the rear sprocket needs replacing, contact a
Ducati Dealer or Authorized Service Center.
If improperly replaced, this component could
seriously endanger your safety and that of your
passenger, and cause irreparable damage to your
motorcycle.
Frame
aluminum alloy cast monocoque frame.
aluminum alloy cast rear subframe.
Steering head angle: 24° 50'
Steering angle: 27° on the left / 27° on the right.
Trail: 100 mm.
Wheels
Front
Three-spoke, light-alloy forged rims.
Size: MT3.50x17"
Rear
Three-spoke, light-alloy forged rims.
Size: MT6.00x17"
Tires
Front
Tubeless, radial tire.
288
Size: 120/70.
Rear
Tubeless, radial tire.
Size: 200/55.
Suspensions
Front
Hydraulic upside-down fork provided with external
adjusters for rebound and compression damping and
preload (for inner springs of fork legs).
Stanchion diameter:
50 mm, TiN coated.
Wheel travel:
4.72 in (120 mm).
Rear
The shock absorber is adjustable for rebound,
compression and spring preload.
The shock absorber is connected to the crankcase at
the front pivot point and to the rocker arm at the rear
pivot point.
The swinging arm is connected to the pivot shafts
going through the engine. The whole system gives
the bike excellent stability.
Wheel travel:
5.12 in (130 mm).