Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Episode CR-CDI1000-LSCAPE
Summary of Contents for Episode CR-CDI1000-LSCAPE
- Page 1 QUICK START MANUAL CR-CDI1000-LSCAPE CR-CDI2000-LSCAPE...
- Page 2 page | 2 Support 866.838.5052...
-
Page 3: Package Contents
| 3 WELCOME TO EPISODE Thank you for purchasing a great product from Episode®, one of the best sounding loudspeaker lines available today. We appreciate your purchase and are committed to providing the highest quality products possible. OVERVIEW This Quick Start Guide provides the basic information that is needed to install a CR-CDI1000-LSCAPE or CR-CDI2000-LSCAPE amplifier. -
Page 4: Speaker Wiring
page | 4 SOURCE INPUT WIRING Mono Adapter Usage For convenience we have included a pre terminated unbalanced line level RCA to Phoenix connector. This adapter converts a stereo signal to mono to feed both channels. We recommend that this method be used in place of the settings for summing within the amplifier. - Page 5 Allows individual channel level control via connected on both channels front panel volume potentiometers Channel 2=70V DSP settings for “flat response” tonal * Can be used with or without the use of balance supplied input summing cable © 2016 Episode®...
- Page 6 page | 6 DEFAULT DEVICE FILE Preset # Preset Input Output Speaker Hookup Configuration/ Additional Notes/Comments Name Mode (Voltage) Comments ST4_HS10 Stereo** Channel 1=8/4Ω LS-HS SUB10 subwoofer (e.g. 8Ω) If desired, 2 subwoofers can be used in connected to channel 1 parallel connection.
- Page 7 Channel 2=8/4Ω DSP settings for “flat response” tonal * Can be used with or without the use of balance supplied input summing cable Maximum of 4 satellites may be wired in parallel per channel © 2016 Episode®...
-
Page 8: Contacting Technical Support
LS-SAT-8 satellites in 70V tap settings connected to channel 2 Channel 2=70V **Must use supplied input summing cable DSP settings for “flat response” tonal balance NOTE: Contact Tech Support for the Optional Device file. CONTACTING TECHNICAL SUPPORT 866.838.5052 support@episodeaudio.com © 2016 Episode® Rev: 16-06-24-1645...
Need help?
Do you have a question about the CR-CDI1000-LSCAPE and is the answer not in the manual?
Questions and answers