Download Table of Contents Print this page

Standard Features - HP 562FLR-SFP+ Quickspecs

Ethernet 10gb 2-port 562flr-sfp+ adapter


Table of Contents

Standard Features

Product Features
Dual-port 10 Gigabit
The HPE 562FLR FlexibleLOM delivers 20Gbps full duplex Ethernet transfer rate per port (40 Gbps
aggregate full duplex), providing the network performance needed to improve response times and alleviate
bottlenecks that impact performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for
high performance computing, database clusters, and more.
Jumbo Frames
The HPE 562FLR FlexibleLOM supports jumbo frames (also known as extended frames), permitting up to a
9.5K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a
standard 1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput
performance and greater CPU utilization. These attributes are particularly useful for database transfer and
tape backup operations.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 562FLR
FlexibleLOM to be separated into multiple virtual NICs for added network segmentation and enhanced
security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast
traffic to within the same VLAN domain also improves performance.
Optimized for
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to
share single PCIe resources. The HPE 562FLR-SFP+ supports SR-IOV, and requires Firmware, Software and
OS support.
MSI and MSI-X Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers
by balancing interrupts between CPUs/cores load.
TCP/IP Stateless
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.
Dual-port 10GbE FlexibleLOM that provides the flexibility to meet growing infrastructure needs.
Industry-leading throughput and latency performance
Up to 40Gb/s bi-directional near line rate throughput
Supports SR-IOV (requires server FW, SW and OS support)
Hardware acceleration and offloads for stateless TCP/IP
Support for Preboot eXecution Environment (PXE)
Supports Wake-on-LAN (at 1 Gb)
NOTE: Wake-on-LAN is supported only on Port 1 from system power state S5.
Improved small packet performance
Integrated PHY and MAC
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
Page 3


Table of Contents

Table of Contents