HP 561T Specification
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Adapter
  5. 561T
  6. Specification

HP 561T Specification

Ethernet 10gb 2-port 561t adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
QuickSpecs
Overview
The HP Ethernet 10Gb 2-port 561T Adapter is a dual-port 10GBASE-T adapter, featuring the Intel X540 10Gb Ethernet solution in a PCIe
2.1 compliant form factor designed for HP ProLiant Gen8 rack and tower servers. The HP 561T adapter delivers full line-rate
performance across all, utilizing CAT 6A UTP cabling (or better) with distances up to 100 meters. Providing high performance Ethernet
connectivity, it is ideal for virtual server and cloud computing environments. It supports enterprise class features (VLAN tagging,
adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot) and virtualization
features (VMware NetQueue and Microsoft VMQ).
The adapter's support for HP Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and
expense.
Models
HP Ethernet 10Gb 2-port 561T Adapter
Kit Contents
HP Ethernet 10Gb 2-port 561T Adapter
Quick install card
Product warranty statement
DA - 14614 North America — Version 1 — September 10, 2013
HP Ethernet 10Gb 2-port 561T Adapter
716591-B21
Page 1

Advertisement

Table of Contents
loading

Related Manuals for HP 561T

Summary of Contents for HP 561T

  • Page 1 Overview The HP Ethernet 10Gb 2-port 561T Adapter is a dual-port 10GBASE-T adapter, featuring the Intel X540 10Gb Ethernet solution in a PCIe 2.1 compliant form factor designed for HP ProLiant Gen8 rack and tower servers. The HP 561T adapter delivers full line-rate performance across all, utilizing CAT 6A UTP cabling (or better) with distances up to 100 meters.
  • Page 2 QuickSpecs HP Ethernet 10Gb 2-port 561T Adapter Compatibility Servers ProLiant DL (rack-optimized): HP ProLiant DL160 Gen8 HP ProLiant DL360e Gen8 HP ProLiant DL360p Gen8 HP ProLiant DL380e Gen8 HP ProLiant DL380p Gen8 HP ProLiant DL385p Gen8 HP ProLiant DL560 Gen8...

  • Page 3: Standard Features

    IEEE 1588 (Time Synchronization) ready Dual-port 10 Gigabit The HP 561T adapter delivers 20 Gbps full duplex Ethernet transfer rate per port , providing the network performance needed to improve response times and alleviate bottlenecks that impact performance of Ethernet Throughput next generation data centers.

  • Page 4: Network Management

    Network Management Management Support The HP 561T adapter can be administered from HP Systems Insight Manager (SIM). The adapters can be managed individually or in teams, providing SNMP based statistics for reporting purposes. The HP 561T adapter can also be managed by other applications with SNMP support.
  • Page 5 Standard Features Server Integration The HP 561T adapter is a validated, tested, and qualified solution that is optimized for HP ProLiant servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HP Intelligent Provisioning and HP Systems Insight Manager that simplify network management.

  • Page 6: Service And Support

    Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need.
  • Page 7 Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request to the HP Global Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In case, the issue is with HP or supported third-party software product and cannot be resolved by applying known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
  • Page 8 The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.

  • Page 9: Related Options

    HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter 394793-B21 HP NC373T PCI-E Multifunction Gigabit Server Adapter 394791-B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21 HP Ethernet 1Gb 4-port 331T Adapter 647594-B21 HP Ethernet 1Gb 2-port 332T Adapter...

  • Page 10: Technical Specifications

    Maximum distances for CAT6A (or better) are 100 meters (328 feet). NOTE: The HP 561T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is recommended.
  • Page 11 Windows is a US registered trademark of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Table of Contents