Advertisement
QuickSpecs
Standard Features
Server Support
Server Support
Server Support
Server Support
Performance
Performance
Performance
Performance
HP ProLiant BL685c G6
HP ProLiant BL685c G7
HP ProLiant BL495c G6
HP ProLiant BL490c G6
HP ProLiant BL465c G6
HP ProLiant BL465c G7
HP ProLiant BL460c G6
HP ProLiant BL460c G7
HP ProLiant BL280c G6
HP ProLiant BL2x220c G6
NOTE: Some servers listed above may be discontinued.
NOTE:
NOTE:
NOTE:
Dual-port 10 Gigabit
Dual-port 10 Gigabit
Dual-port 10 Gigabit
Dual-port 10 Gigabit
Ethernet Throughput
Ethernet Throughput
Ethernet Throughput
Ethernet Throughput
HP Virtual Connect Flex-
HP Virtual Connect Flex-
HP Virtual Connect Flex-
HP Virtual Connect Flex-
10 10Gb Ethernet Module
10 10Gb Ethernet Module
10 10Gb Ethernet Module
10 10Gb Ethernet Module
for the c-Class
for the c-Class
for the c-Class
for the c-Class
BladeSystem
BladeSystem
BladeSystem
BladeSystem
Jumbo Frames
Jumbo Frames
Jumbo Frames
Jumbo Frames
802.1p QoS Tagging
802.1p QoS Tagging
802.1p QoS Tagging
802.1p QoS Tagging
TCP/IP Stateless
TCP/IP Stateless
TCP/IP Stateless
TCP/IP Stateless
Offloading
Offloading
Offloading
Offloading
Interrupt Coalescence
Interrupt Coalescence
Interrupt Coalescence
Interrupt Coalescence
Receive-Side Scaling (RSS) Receive-Side Scaling (RSS) resolves the single-processor bottleneck by
Receive-Side Scaling (RSS)
Receive-Side Scaling (RSS)
Receive-Side Scaling (RSS)
TOE
TOE
TOE
TOE
iSCSI
iSCSI
iSCSI
iSCSI
Low Latency Ethernet
Low Latency Ethernet
Low Latency Ethernet
Low Latency Ethernet
DA - 13502
North America — Version 4 — September 10, 2010
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c
The NC542m 20,000 Mbps full duplex Ethernet transfer rate per port (40
Gbps aggregate full duplex) delivers outstanding network performance that
improves response time and removes bottlenecks required for the next
generation data center. Using the latest Mellanox ConnectX -2 EN controller,
this adapter provides industry leading throughput and latency performance.
The NC542 will support full Flex-10 functionality with a firmware update to
be made available 1H10.
The NC542m support for jumbo frames (also known as extended frames)
permit up to a 9K byte transmission unit (MTU), which is over five times the
size of standard 1500 byte Ethernet frame. The use of jumbo frames is a way
to achieve higher throughput and better CPU utilization. Jumbo frames are
particularly useful for database transfers and tape backups.
IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or
tag frames with a priority level across a QoS-aware network for improved
traffic flow.
For overall improved system response, the NC542m supports standard
TCP/IP stateless offloading techniques including:
TCP/IP checksum offload (TCO) moves the TCP and IP checksum
offloading from the CPU to the network adapter.
Large send offload (LSO), also known as TCP segmentation offload (TSO),
allows TCP segmentation to be handled by the adapter rather than the CPU.
Interrupt coalescing (interrupt moderation) groups multiple packets, thereby
reducing the number of interrupts sent to the host. This process optimizes host
efficiency, leaving the CPU available for other duties.
allowing the receive side network load from a network adapter to be shared
across multiple processors.
The NC542m does not support TOE.
The NC542m does not support accelerated iSCSI or iSCSI boot.
Low Latency Ethernet is an efficient RDMA transport over Layer2 10GbE
networks for performance-critical and low-latency applications. LLE will be
supported when made available by Mellanox.
Adapter
Adapter
Adapter
Adapter
Page 3
Advertisement
