QuickSpecs
Overview
The HP Ethernet 10Gb 2-port 560FLB Adapter features the next generation of 10Gb Ethernet offering based on Intel 82599 chipset on
a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use with HP
BladeSystem c-Class Gen8 servers.
It provides full duplex high performance Ethernet connectivity. The HP 560FLB FlexibleLOM network adapter helps to extend the
benefits of virtualization beyond the server and into the rest of the infrastructure.
The HP 560FLB supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding),
Wake-on-LAN, Receive Side Scaling (RSS), jumbo frames, EEE 1588, PXE boot and virtualization features such as VMware NetQueue,
Microsoft VMQ and Intels VMDq.
Models
HP Ethernet 10Gb 2-port 560FLB Adapter
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
NOTE: The HP 560FLB on each server blade connects to a 10Gb interconnect in bays 1-2 (HP BladeSystem c7000
Enclosure) or bay 1 (HP BladeSystem c3000 Enclosure).
NOTE: The 560FLB requires a minimum of 2 GB of server memory.
NOTE: The 560FLB supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device.
NOTE: The 560FLB will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
Kit contents
HP Ethernet 10Gb 2-port 560FLB Adapter
HP Ethernet 10Gb 2-port 560FLB Adapter
Quick install card
Product warranty statement
Drivers, user guide, and utilities via
DA - 14331 Worldwide — Version 10 — March 21, 2014
HP Ethernet 10Gb 2-port 560FLB Adapter
http://www.hp.com
655639-B21
684214-B21
Page 1