HP Ethernet 10Gb 2-port 561FLR-T Adapter Overview The HP Ethernet 10Gb 2-port 561FLR-T Adapter is a dual-port 10GBASE-T adapter, featuring the 10Gb Intel X540 Controller in FlexibleLOM form factor designed for HP ProLiant Gen8 rack and tower servers. The HP 561FLR-T Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP (or better) cabling with distances up to 100 meters and is backward compatible to existing 1000BASE-T infrastructure.
QuickSpecs HP Ethernet 10Gb 2-port 561FLR-T Adapter Compatibility Servers ProLiant DL (rack-optimized): HP ProLiant DL160 Gen8 HP ProLiant DL360p Gen8 HP ProLiant DL380p Gen8 HP ProLiant DL385p Gen8 HP ProLiant DL560 Gen8 ProLiant SL (scalable line): HP ProLiant SL230s Gen8...
Support for Preboot eXecution Environment (PXE) IEEE 1588 (Time Synchronization) ready Dual-port 10 Gigabit The HP 561FLR-T adapter delivers 20 Gbps full duplex Ethernet transfer rate per port, providing the network performance needed to improve response times and alleviate bottlenecks that impact Converged Ethernet performance of next generation data centers.
The HP 561FLR-T Adapter supports Precision Time Protocol-ready (PTP). Network Adapter Teaming The HP 561FLR-T adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, The team of adapters can work together as a single virtual adapter. The HP 561FLR-T provides support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs.
Standard Features Server Integration The HP 561FLR-T adapter is a validated, tested, and qualified solution that is optimized for HP ProLiant servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HP Intelligent Provisioning and HP Systems Insight Manager that simplify network management.
Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need.
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request to the HP Global Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In case, the issue is with HP or supported third-party software product and cannot be resolved by applying known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.
Maximum distances for CAT6A (or better) are 100 meters (328 feet). NOTE: The HP 561FLR-T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is recommended.
Windows is a US registered trademark of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.