Bijzondere Veiligheidsvoorschriften; Cleaning; Lamp Durability; Changing The Bulb - Silvercrest SRL 100 A1 Operating Manual

Cleaning

Always disconnect the plug
from the mains socket
before cleaning and allow
Caution
the unit to cool completely
before cleaning and storing
it!
To clean the outside of the unit, use a dry
or at most slightly damp, well-wrung cloth.
Then dry it well. Do not use aggressive or
abrasive cleaning agents.
If necessary, wipe off the cooled lamp with
a dry cloth.

Lamp Durability

All appliances are subject to rigorous
testing before leaving the factory. If you
use
the infrared lamp as described in these
instructions, the performance will remain
constant for the entire lifetime of approx.
300 constant operating hours
(= approx. 1200 applications of approx.
15 minutes).
The guarantee does not cover light bulbs.
36
Operating Instructions SRL 100 A1-51/2013-1.05

Changing the Bulb

Before changing the bulb
disconnect the plug from the
mains socket. Only change
Danger
the bulb when it is cool!
When replacing the bulb,
ensure that a bulb of the
same type (Philips, R95 E27,
230 V, 100 W) is used.
Ambient Conditions for
Transport/Storage
• Ambient temperature between
-15° C and +40° C
• Relative humidity between
30% and 75%
• Air pressure between 700 hPa and
1060 hPa
GB MT