optris PI LightWeight kit Operator's Manual page 53

The following points need to be considered when using a GoPro camera:
GoPro4 data transfer and video mode is supported by firmware version ≥ v1.1.3.0
-
- GoPro data transfer relies on USB 2.0 data transfer rate. Large video files requires
a long transfer time to USB Stick. To avoid automatic data transfer to USB drive,
remove USB bridge cable from Recording box.
- Data transfer for GoPro3 works only one time. Recording box needs to be
restarted for new data transfer.
- Data cannot be deleted from GoPro camera, this has to be done manually via the
GoPro menu.
After the data transfer the charging mode on the GoPro camera is
activated automatically. By interrupting the USB connection or switch
off the Recording box the charging mode can be terminated.
During the charging mode there is no GoPro video image available –
if you switch on the VIS channel you will see this message:
53