Operation; Startup Of The Recording Box - optris PI LightWeight kit Operator's Manual

4

Operation

4.1

Startup of the Recording box

To startup PI LightWeight, connect all the cables according to the desired operating mode and simply
plug the provided power cable (powered from power supply or LiPo battery), there is no ON/OFF switch.
Before to power on the Recording box, the HDMI output must be connected either to
the Micro-HDMI socket, or to a powered monitor to ensure a correct initialization of
the video output.
To power off the system please disconnect the power cable (no need to connect a keyboard to properly
shutdown).
If an Ethernet connection is active with internet access at startup, the system will be
set to the current time and date, and if necessary the calibration files will be
downloaded from the internet.
35