6. Functions and menu items of the remote control
Names and functions of sections on the R/C
Touch panel system, which is operated by tapping the LCD screen with a finger, is employed for any operations other
than the ① Run/Stop, ② F1 ③ F2 switches.
① Run/Stop switch
One push on the button starts operation and another
push stops operation.
② F1 switch ③ F2 switch
This switch starts operation that is set in F1/F2
function setting.
④ Operation lamp
This lamp lights in green (yellow-green) during
operation. It changes to red (orange) if any error
occurs.
Operation lamp luminance can be changed.
⑤ LCD (With backlight)
A tap on the LCD lights the backlight.
The backlight turns off automatically if there is no
operation for certain period of time.
Lighting period of the backlight lighting can be
changed.
If the backlight is ON setting, when the screen is
⑤ LCD (With backlight)
16 : 14 (Mon)
Cooling
Set temp
Timer
Now stopping.
F1: High power
F2: Energy-saving
④ Operation lamp
⑥ USB port (mini-B)
① Run/Stop switch
② F1 switch
tapped while the backlight is turned off, the backlight
only is turned on. (Operations with switches ①, ②
and ③ are excluded.)
⑥ USB port
USB connector (mini-B) allows connecting to a
personal computer.
For operating methods, refer to the instruction
manual attached to the software for personal
computer (eco-touch remote control utility software).
Note
When connecting to a personal computer, do not connect
simultaneously with other USB devices.
Please be sure to connect to the computer directly, without going
through a hub, etc.
−9−
(Operating section)
Menu
Direction
③ F2 switch