Power On And Initial Setting - Mitsubishi RC-EX3 Installation Manual

8. Power on and initial setting

Set the main and sub R/C units according to the display at the power on.
･ Main/Sub setting not performed => (1)
･ Main/Sub setting performed
⑴ When the main and sub are not yet set,
①⇒② Main/sub input screen is displayed.
When tapping the
Main
If any wrong button has been tapped by mistake, the setting can be changed after the end of the initializing operation. (10. R/C
function setting④)
When using two eco touch remote controllers for one IU or one group, if the first one is set for the
Sub automatically.
① Start screen
Version :
Program ID :
③ IU search on
Searching IU
The red LED will blink if communication is
not established in ten minutes.
=> (2)
or button, initial setting starts.
Sub
② Main/sub set input
Select main or sub remote control.
The screen changes to ③⇒④⇒⑤.
Main
The screen changes to ①⇒⑧⇒⑤.
Sub
④ IU info acquisition on
Will finish 1230 seconds later.
Main Sub
Loading IU settings.
−13−
, the second is set for the
Main
Caution
When only one unit of R/C is
used, tap the Main button.
In the state of initial setting, if
either one of buttons ([Main]/[Sub])
is not tapped, it keeps the screen
unchanged.
⑤ TOP screen
16 ： 14 (Mon)
Direction
Cooling
Set temp
Timer
Now stopping.
F1: High power F2: Energy-saving
Menu