R/C Sensor Adjustment; Operation Mode; Fan Speed; External Input - Mitsubishi RC-EX3 Installation Manual

⑦ TOP screen (sensor at main unit)
MEETING1
16 ： 00 (Mon)
Auto
Set temp
Timer
Room
In operation for running.
F1: High power F2: Energy-saving
When the R/C sensor is disabled, the TOP
screen displays "Room ○ °C".
⑩ Adjustment in cooling
Adjustment in cooling
Tap ▲▼ to set offset value.
The R/C sensor detection temperature
during cooling operation can be corrected.
Set the value within the range of -3 to +3.
⑬ °C/°F
ºC / ºF
Select the item.
Select the unit of temperature displayed
on the R/C.
⑧ TOP screen (sensor at R/C)
MEETING1
Menu
16 ： 00 (Mon)
Direction
Auto
Timer
In operation for running.
F1: High power
When the R/C sensor is enabled, the TOP
screen displays "Room (R/C) ○ °C".
⑪ Adjustment in heating
Adjustment in heating
Tap ▲▼ to set offset value.
Set
Back
The R/C sensor detection temperature
during heating operation can be corrected.
Set the value within the range of -3 to +3.

⑭ Fan speed

Fan speed
4-speed
3-speed
2-speed （ Hi-Lo）
2-speed （ Hi-Me）
1-speed
Back
Select the item.
Fan speed can be changed to the selected
one.
It may not be available to select some
of fan speeds depending on indoor unit
models.
Menu
Direction
Set temp
Room (R/C)
F2: Energy-saving
Set
Back
Back
−19−

⑨ R/C sensor adjustment

R/C sensor adjustment
Adjustment in cooling
10
Adjustment in heating 11
Select the item.
You can adjust the R/C sensor detection
temperature.
⇒ ⑩
Adjustment in cooling
⇒ ⑪
Adjustment in heating

⑫ Operation mode

Operation mode
Auto Disable
Cooling Disable
Heating Disable
Dry Disable
Set
Select the item.
Enable or Disable can be set for
each operation mode.
If the cooling or heating is disabled, the
auto is also disabled.

⑮ External input

External input
Individual
All units
Select the item.
Set the range to apply the external input
received through CNT of either one IU
to plural indoor units connected in one
system
Individual This is applied only to the
IU receiving CNT input.
All units This is applied to all indoor
units connected.
Back
Enable
Enable
Enable
Enable
Back
Back