Default Settings - Cisco MDS 9000 Series Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 5-2
switch# show trunk protocol
Trunk protocol is enabled
Example 5-3
switch# show interface trunk vsan 1-1000
fc3/1 is not trunking
...
fc3/7 is trunking
...
fc3/10 is trunking
fc3/11 is trunking
...
port-channel 6 is trunking
Default Settings
Table 5-4
Table 5-4
Parameters
Switch port trunk mode
Allowed VSAN list
Allowed VF-ID list
Trunking protocol on E ports
Trunking protocol on F ports
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
5-14
Displays the Trunking Protocol
Displays Per VSAN Information on Trunk Ports
Vsan 1000 is down (Isolation due to vsan not configured on peer)
Vsan 1 is up, FCID is 0x760001
Vsan 2 is up, FCID is 0x6f0001
Belongs to port-channel 6
Vsan 1 is up, FCID is 0xef0000
Vsan 2 is up, FCID is 0xef0000
Vsan 1 is up, FCID is 0xef0000
Vsan 2 is up, FCID is 0xef0000
lists the default settings for trunking parameters.
Default Trunk Configuration Parameters
Chapter 5
Default
ON on non-NPV and MDS core switches.
OFF on NPV switches.
1 to 4093 user-defined VSAN IDs.
1 to 4093 user-defined VF-IDs.
Enabled.
Disabled.
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)
Configuring Trunking