Cisco MDS 9000 Series Configuration Manual page 75

Chapter 3 Configuring Fibre Channel Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 3-3
Table 3-3
Part Number
Generation 3 Modules
DS-X9248-96K9
DS-X9224-96K9
DS-X9248-48K9
Generation 2 Modules
DS-X9148
DS-X9124
DS-X9304-18K9
(MSM-18/4
Multiservice
module)
DS-X9112
DS-X9704
Generation 2 Switches
DS-C9134-K9
(Cisco MDS 9134
Fabric switch)
DS-C9124
(Cisco MDS 9124
Fabric switch)
DS-C9222i-K9
(Cisco MDS 9222i
Multiservice
Modular switch)
1. Shared rate mode is supported on Fx ports only and no ISLs.
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)
shows the modules that support dedicated, shared, and the default rate modes.
Port Rate Mode Support on Generation 2 and Generation 3 Modules and Switches
Product Name/
Description
48-Port 8-Gbps Fibre
Channel switching module
24-Port 8-Gbps Fibre
Channel switching module
4/44-Port 8-Gbps
Host-Optimized Fibre
Channel switching module
48-port 4-Gbps Fibre
Channel switching module
24-port 4-Gbps Fibre
Channel switching module
18-port 4-Gbps Fibre
Channel switching module
with 4-Gigabit Ethernet
ports
12-port 4-Gbps Fibre
Channel switching module
4-port 10-Gbps Fibre
Channel switching module
32-port 4-Gbps Fabric
switch
2-port 10-Gbps Fabric
switch
24-port 4-Gbps Fabric
3
switch
18-port 4-Gbps Fibre
Channel switch with
4-Gigabit Ethernet IP
storage services ports, and
a modular expansion slot to
host Cisco MDS 9000
Family Switching and
Services Modules
Supports
Dedicated Rate
Mode
Yes
Yes
Yes
Yes
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
Port Groups and Port Rate Modes
Supports Default Speed
Shared Rate Mode and Rate
Mode Mode on All Ports
1
Yes Auto, Shared
1
Yes Auto, Shared
1
Yes Auto Max 4 Gbps,
Shared
Yes Auto, Shared
Yes Auto, Shared
Yes Auto, Shared
No Auto, Dedicated
No Auto, Dedicated
Yes Auto, Shared
No Auto, Dedicated
No Auto, Dedicated
Yes Auto, Shared
3-5