Cisco MDS 9000 Series Configuration Manual page 41

Chapter 2 Configuring Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fc1/13 is up
Hardware is Fibre Channel, SFP is short wave laser
Port WWN is 20:0d:00:05:30:00:97:9e
Admin port mode is auto, trunk mode is on
Port mode is F, FCID is 0x650100
Port vsan is 100
Speed is 2 Gbps
Transmit B2B Credit is 3
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
. . .
sup-fc0 is up
Hardware is Fibre Channel
Speed is 1 Gbps
139597 packets input, 13852970 bytes
139516 packets output, 16759004 bytes, 0 underruns
You can also specify arguments (a range of interfaces or multiple, specified interfaces) to display
interface information. You can specify a range of interfaces by issuing a command with the following
example format:
interface fc1/1 - 5 , fc2/5 - 7
Note The spaces are required before and after the dash ( - ) and before and after the comma ( , ).
Example 2-4
switch# show interface fc3/13 , fc3/16
fc3/13 is up
Hardware is Fibre Channel, SFP is short wave laser
Port WWN is 20:8d:00:05:30:00:97:9e
Admin port mode is FX
Port mode is F, FCID is 0x7b0300
Port vsan is 1
Speed is 2 Gbps
Transmit B2B Credit is 3
Receive B2B Credit is 12
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)
8696 frames input, 3227212 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
16799 frames output, 6782444 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
1 output OLS, 1 LRR, 0 NOS, 1 loop inits
16 receive B2B credit remaining
3 transmit B2B credit remaining.
0 multicast frames, 0 compressed
0 input errors, 0 frame, 0 overrun 0 fifo
0 output errors, 0 collisions, 0 fifo
0 carrier errors
Displays Multiple, Specified Interfaces
1856 frames input, 116632 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
Fibre Channel Interfaces
2-21