Cisco MDS 9000 Series Configuration Manual page 172

Verifying the PortChannel Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 6-6
switch# show port-channel usage
Totally 3 port-channel numbers used
===================================
Used
Unused:
Example 6-7
switch# show port-channel compatibility-parameters
physical port layer
port mode
trunk mode
speed
port VSAN
port allowed VSAN list
Use the existing show commands to obtain further details on autocreated channel group attributes.
Autocreated PortChannels are indicated explicitly to help differentiate them from the manually created
PortChannels. See Examples
Example 6-8
switch# show interface fc1/1
fc1/1 is trunking
Hardware is Fibre Channel, FCOT is short wave laser
Port WWN is 20:0a:00:0b:5f:3b:fe:80
...
Receive data field Size is 2112
Beacon is turned off
Port-channel auto creation is enabled
Belongs to port-channel 123
...
Example 6-9
switch# show port-channel database interface port-channel 128
port-channel 128
Administrative channel mode is active
Operational channel mode is active
Last membership update succeeded
Channel is auto created
First operational port is fc1/1
1 ports in total, 1 ports up
Ports:
Example 6-10 Displays the PortChannel Summary
switch# show port-channel summary
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
port-channel 1
port-channel 2
port-channel 3
port-channel 4
port-channel 5
port-channel 6
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
6-24
Displays the PortChannel Usage
: 77 - 79
1 - 76 , 80 - 256
Displays the PortChannel Compatibility
6-8
Displays Autocreated PortChannels
Displays the Specified PortChannel Interface
fc1/1 [up] *
Total Ports
fibre channel or ethernet
E/AUTO only
to 6-10.
Oper Ports
1 0
1 1
0 0
0 0
1 1
0 0
Chapter 6 Configuring PortChannels
First Oper Port
--
fc8/13
--
--
fc8/3
--
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)