Replacing The Wxdp 120 - Weller WXD 2 Operating Instructions Manual

WXDP 120
WARNING!

6 Replacing the WXDP 120

To obtain good desoldering results, it is important to regularly clean
the desoldering head. This includes emptying and replacing the
solder container (glass tube) (8) as well as checking the seals. The
front faces of the glass tube must be absolutely leak-tight to ensure
full suction performance. Soiled filters will impair air flow through the
desoldering iron.
A range of suction nozzles provides solutions to many desoldering
problems. The Cleaning Set (T0058765773) includes a tool suitable
for replacing the suction nozzles. Suction nozzles can be replaced
easily and quickly by turning them about approx. 45°. To fit and lock
the suction nozzle, press it lightly against the heating element.
Replace and clean the suction nozzle only when it is hot. Use the
cleaning tool to clean the suction nozzle port and the suction tube.
It will not be possible to fit a new suction nozzle if heavy deposits
have accumulated on the tip. These deposits can be removed using
the Tip Cleaner (T0058765772) for the heating element tip.
Risk of burns
The suction nozzle will become very hot during desoldering.
Touching the suction nozzle can cause burns.
The desoldering tool must be switched off, in the safety rest
(WDH 70) for at least 3 minutes until the suction nozzle has
cooled down. The status indicator LED (6) must be OFF. Only
replace the soldering tips when they are cold.
6.1 Cleaning and emptying the glass tube
Use the Cleaning Set (T0058765773) to clean the glass tube.
The glass tube is cleaned without the suction nozzle.
6.2 XDS Suction Nozzles for desoldering iron
WXDP 120
Refer to table of XDS Suction Nozzles for desoldering iron
WXDP 120 at the end of these operating instructions and visit
www.weller-tools.com
6.3 Replacement parts and accessories for
WXDP 120
Order no. Description
T0051320199 WXDP 120 desoldering iron
T0051517299 WDH 70 safety rest
T0051384199 Metal wool for cleaning element for WDC 2
T0051312499 Service Set DSX
Cleaning Set WXDP/DSX 120
T0058765772
Tip Cleaner WXDP/DSX 120
T0058765773
Refer to the exploded-view diagram of the WXDP 120 desoldering
iron at the end of these operating instructions and visit
www.weller-tools.com
7-8